spacer.gif
 

floppydtv_s2_400.jpg

Digital Satellite ( DVB-S2 and DVB-S ) Receiver for multimedia computer

 

floppydtv_front_400.jpg

floppydtv_packaging_300.jpg

Main Features


Support for  HDTV Channels

- DVB-S and DVB-S2 receiver

- Software decoding of MPEG2 and MPEG4 / H.264

- Watch and record TV in the highest available quality

warning.jpg  Read the "System requirements" below!

astrahd_fireworks_300.jpg


Support for PayTV Channels

- Integrated Common Interface , watch and record Free To Air or PayTV channels

- Compatible with most popular CAMs

- Tested with several PayTV providers

 

warning.jpg  PayTV channels require a CAM and a valid smartcard (subscription)

 
floppydtv_front_cam_250.jpg


 

Fully integrated in Windows Media Center   mce_50.jpg    vista_50.jpg

- Easy to use in Windows Media Center    

- Driver for Windows Media Center in Vista64 are also available in the download section

 

vista_mce_300.jpg 

 warning.jpg  Windows Media Center doesn't support MPEG4/H.264 channels!!!



Integrated in most popular Media Center Software

- Fully integrated in many TV Software like DVBViewer Mediaportal

- Driver for Vista 64 bit also available in the download section

new.jpg Now FireDTV S2 also works with EyeTV 3 on Apple Computers !

dvbviewer_logo.jpg 

mp_logo_180.jpg 

eyetv_180.jpg


Fits in almost any computer!

- FloppyDTV S2 can be mounted on any PCI, PCI-Express, AGP or empty slot

- Need only a single PCI Slot

- Connection to the computer through FireWire (IEEE1394)

- Easy connect more than one FloppyDTV thanks to the integrated FireWire Repeater

- Also suitable to be mounted on 3,5" Floppy Drive Bay (additional adapter available separately)

- Download the Assembly Guide

   floppydtv_flaps_250.jpg

 


System requirements  


- FireWire (IEEE1394) port on board or with OHCI-adapter

- For PayTV: CAM-Module, valid subscription/smartcard

- For Windows Media Center in WinMCE 2005: RollUp2, MPEG2 software decoder

- For Windows Media Center in Vista: Vista Home Premium or Vista Ultimate

- For other compatible TV software: Windows XP SP2 or later, MPEG2 decoder

- For SDTV: Pentium@ IV 1,5GHz, AMD Athlon XP+ 2000

- For HDTV: Minimum: Pentium@ IV 3,5GHz, AMD Athlon XP+ 3500, DXVA/H.264 graphic card (Windows XP)  
                  Recommended: Dual Core processor (REQUIRED for WinMCE 2005 or Vista)

- For H.264 channels: H.264 software decoders



Front End features


- Antenna Connector: F-Type 75 Ohm

- Input Frequency Range: 950-2150MHz

- Supported Modulation: 8PSK/QPSK (DVB-S2), QPSK (DVB-S)

- LNB Supply, 13/18V, 22KHz tone, max. 400mA

- DiseqC: 1.0, 1.1, 1.2 (depending on used Software)



Included in the "FloppyDTV S2"  


- FloppyDTV S2, with pre-assembled power cable and FireWire cable (also suitable for connection to the motherboard)

- Printed Assembly and Quick Install Guide

- Setup CD with BDA and Windows Media Center driver for WinMCE 2005 and Vista 32Bit (Home Premium or Ultimate)

- FireDTV Viewer Software to watch and record TV channels. Vista 32 and 64 capable, H.264 capable

 warning.jpg  MPEG4 / H.264 Software decoders are NOT included in the FloppyDTV S2 package



Accessories (sold separately)


A "FloppyDTV Extension KIT" is also available and includes:

- 3,5" FloppyDTV Adapter

- Remote control

- MPEG2 / MPEG4 Software decoders (Main Concept)

- CD with Drivers and FireDTV Software

 
© by digital everywhere - top - print

floppydtv_s2_400.jpg

Digital Satellite ( DVB-S2 and DVB-S ) Receiver for multimedia computer

 

floppydtv_front_400.jpg

floppydtv_packaging_300.jpg

Main Features


Support for  HDTV Channels

- DVB-S and DVB-S2 receiver

- Software decoding of MPEG2 and MPEG4 / H.264

- Watch and record TV in the highest available quality

warning.jpg  Read the "System requirements" below!

astrahd_fireworks_300.jpg


Support for PayTV Channels

- Integrated Common Interface , watch and record Free To Air or PayTV channels

- Compatible with most popular CAMs

- Tested with several PayTV providers

 

warning.jpg  PayTV channels require a CAM and a valid smartcard (subscription)

 
floppydtv_front_cam_250.jpg


 

Fully integrated in Windows Media Center   mce_50.jpg    vista_50.jpg

- Easy to use in Windows Media Center    

- Driver for Windows Media Center in Vista64 are also available in the download section

 

vista_mce_300.jpg 

 warning.jpg  Windows Media Center doesn't support MPEG4/H.264 channels!!!



Integrated in most popular Media Center Software

- Fully integrated in many TV Software like DVBViewer Mediaportal

- Driver for Vista 64 bit also available in the download section

new.jpg Now FireDTV S2 also works with EyeTV 3 on Apple Computers !

dvbviewer_logo.jpg 

mp_logo_180.jpg 

eyetv_180.jpg


Fits in almost any computer!

- FloppyDTV S2 can be mounted on any PCI, PCI-Express, AGP or empty slot

- Need only a single PCI Slot

- Connection to the computer through FireWire (IEEE1394)

- Easy connect more than one FloppyDTV thanks to the integrated FireWire Repeater

- Also suitable to be mounted on 3,5" Floppy Drive Bay (additional adapter available separately)

- Download the Assembly Guide

   floppydtv_flaps_250.jpg

 


System requirements  


- FireWire (IEEE1394) port on board or with OHCI-adapter

- For PayTV: CAM-Module, valid subscription/smartcard

- For Windows Media Center in WinMCE 2005: RollUp2, MPEG2 software decoder

- For Windows Media Center in Vista: Vista Home Premium or Vista Ultimate

- For other compatible TV software: Windows XP SP2 or later, MPEG2 decoder

- For SDTV: Pentium@ IV 1,5GHz, AMD Athlon XP+ 2000

- For HDTV: Minimum: Pentium@ IV 3,5GHz, AMD Athlon XP+ 3500, DXVA/H.264 graphic card (Windows XP)  
                  Recommended: Dual Core processor (REQUIRED for WinMCE 2005 or Vista)

- For H.264 channels: H.264 software decoders



Front End features


- Antenna Connector: F-Type 75 Ohm

- Input Frequency Range: 950-2150MHz

- Supported Modulation: 8PSK/QPSK (DVB-S2), QPSK (DVB-S)

- LNB Supply, 13/18V, 22KHz tone, max. 400mA

- DiseqC: 1.0, 1.1, 1.2 (depending on used Software)



Included in the "FloppyDTV S2"  


- FloppyDTV S2, with pre-assembled power cable and FireWire cable (also suitable for connection to the motherboard)

- Printed Assembly and Quick Install Guide

- Setup CD with BDA and Windows Media Center driver for WinMCE 2005 and Vista 32Bit (Home Premium or Ultimate)

- FireDTV Viewer Software to watch and record TV channels. Vista 32 and 64 capable, H.264 capable

 warning.jpg  MPEG4 / H.264 Software decoders are NOT included in the FloppyDTV S2 package



Accessories (sold separately)


A "FloppyDTV Extension KIT" is also available and includes:

- 3,5" FloppyDTV Adapter

- Remote control

- MPEG2 / MPEG4 Software decoders (Main Concept)

- CD with Drivers and FireDTV Software