 |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Digital Cable ( DVB-C ) Receiver for multimedia computer
|
|
Read more in Reviews |
Main Features
|
Support for HDTV Channels - DVB-C receiver (up to QAM256 ) - Software decoding of MPEG2 and MPEG4 / H.264 - Watch and record TV in the highest available quality
|
|
|
Support for PayTV Channels - Integrated Common Interface , watch and record Free To Air or PayTV channels - Compatible with most popular CAMs - Tested with several PayTV providers
|
|
|
Fully integrated in Windows Media Center - Easy to use in Windows Media Center - Driver for Windows Media Center in Vista64 are also available in the download section
|
|
Windows Media Center doesn't support MPEG4/H.264 channels!!!
|
Integrated in most popular Media Center Software - Fully integrated in many TV Software like DVBViewer , Mediaportal - Driver for Vista 64 bit also available in the download section
|
|
|
Fits in almost any computer! - FloppyDTV C/CI can be mounted on any PCI, PCI-Express, AGP or empty slot - Need only a single PCI Slot - Connection to the computer through FireWire (IEEE1394) - Easy connect more than one FloppyDTV thanks to the integrated FireWire Repeater - Special FireWire cable is provided to connect the FloppyDTV to the Motherboard - Also suitable to be mounted on 3,5" Floppy Drive Bay (additional adapter available separately in the FloppyDTV Extension Kit)
|
|
- FireWire (IEEE1394) port on board or with OHCI-adapter
- For PayTV: CAM-Module, valid subscription/smartcard
- For Windows Media Center in WinMCE 2005: RollUp2, MPEG2 software decoder
- For Windows Media Center in Vista: Vista Home Premium or Vista Ultimate
- For other compatible TV software: Windows XP SP2 or later, MPEG2 decoder
- For SDTV: Pentium@ IV 1,5GHz, AMD Athlon XP+ 2000
- For HDTV: Minimum: Pentium@ IV 3,5GHz, AMD Athlon XP+ 3500, DXVA/H.264 graphic card (Windows XP)
Recommended: Dual Core processor (REQUIRED for WinMCE 2005 or Vista)
Front End features
- Antenna Connector Input: IEC-Type 75 Ohm
- Antenna Connector Output: IEC-Type 75 Ohm
- Input Frequency Range: 51-858MHz
- Supported Modulation: QAM4, QAM16, QAM64, QAM 128, QAM256
Included in the "FloppyDTV C/CI"
- FloppyDTV C/CI, with pre-assembled power cable and FireWire cable (also suitable for connection to the motherboard)
- Antenna Cable
- Additional PCI mask to let the FireWire cable go outside the PC Housing if required.
- Printed Assembly and Quick Install Guide
- Setup CD with BDA and Windows Media Center driver for WinMCE 2005 and Vista 32Bit (Home Premium or Ultimate)
- FireDTV Viewer Software to watch and record TV channels. Vista 32 and 64 capable, H.264 capable
- Vista 64Bit driver are available for download
MPEG4 / H.264 Software decoders are NOT included in the FloppyDTV C/CI package
A " FloppyDTV Extension KIT " is also available and includes: - 3,5" FloppyDTV Adapter - Remote control - MPEG2 / MPEG4 Software decoders (Main Concept) - CD with Drivers and FireDTV Software
Accessories (sold separately)
Now FloppyDTV C/CI also works with 
